INDEX
1. Specifications
2. Dimension
3. Installation and connection
4. Electrical Wiring
5. Display Controller Operation
6. Maintenance
Thank you for using our heater for your pool heating, it will heat your pool water and keep the constant
temperature when the air ambient temperature is above -5 ℃
ATTENTION: This manual includes all the necessary information with the use and the installation of your
heat pump.
The installer must read the manual and attentively follow the instructions in implementation and maintenance.
The installer is responsible for the installation of the product and should follow all the instructions of the
manufacturer and the regulations in application. Incorrect installation against the manual implies the exclusion of
the entire guarantee.
The manufacturer declines any responsibility for the damage caused with the people, objects and of the errors due
to the installation that disobey the manual guideline. Any use that is without conformity at the origin of its
manufacturing will be regarded as dangerous.
WARNING:
Do not use means to accelerate the defrosting process or to clean, other than those recommended by the
manufacturer.
The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames,
an operating gas appliance or an operating electric heater.)
Do not pierce or burn.
Be aware that refrigerants may not contain an odour.
Appliance shall be installed, operated, and stored in a room with a floor area larger than X m2.
NOTE The manufacturer may provide other suitable examples or may provide additional information about the
refrigerant odour.
WARNING: Please always empty the water in heat pump during wintertime or when the ambient temperature
drops below 0℃, or else the Titanium exchanger will be damaged because of being frozen, in such case, your
warranty will be lost.
WARNING: Please always cut the power supply if you want to open the cabinet to reach inside the heat pump,
because there is high voltage electricity inside.
WARNING: Please well keep the display controller in a dry area to protect the display controller from being
damaged by humidity.
2021-2022
Page 2 / 61