Maintenance; Notes On Cleaning; Disposal - Mettler Toledo PBA436 Manual De Usuario

4 Maintenance

4.1 Notes on Cleaning

Note
Damage to the weighing platform due to incorrect use of cleaning agents.
Only use disinfectants and cleaning agents in accordance with their manufacturer's instructions.
Do not use highly acidic, highly alkaline or highly chlorinated cleaning agents. Avoid substances with a
high or low pH value since increased danger of corrosion otherwise exists.
Do not use high-pressure cleaners.
Cleaning Procedure
Take off the load plate and remove any dirt and foreign
substances which may have collected underneath it.
Do not use any hard objects to do so.
Do not disassemble the weighing platform.
Clean the weighing platform with splash water
(5 L/min.) and, if necessary, a mild cleaning agent. Remove any remaining detergent by rinsing with clear
water.
To prolong the life time of the load cell, dry it off with a soft lintfree cloth immediately after cleaning.

4.2 Disposal

In conformance with the European Directive 2012/19/EU on Waste Electrical and Electronic
Equipment (WEEE) this device may not be disposed of in domestic waste. This also applies
to countries outside the EU, per their specific requirements.
Please dispose of this product in accordance with local regulations at the collecting point
specified for electrical and electronic equipment. If you have any questions, please contact
the responsible authority or the distributor from which you purchased this device. Should this
device be passed on to other parties, the content of this regulation must also be related.
8 Maintenance​ ​