Bulb Replacement - Candy CFT610/5X/1 Manual De Instrucciones

NOTE:
• Make sure the filter is securely locked. Otherwise, it would loosen and cause
dangerous.
• When activated carbon filter attached, the suction power will be lowered.

BULB REPLACEMENT

Important :
Changing the light:
*Before changing the lights, make sure that the appliance is plugged off.
*Use the screw driver loosen the ST4*8MM self tapping screw (2pcs) from the lighting
panel, take out the lighting fixture. Open the terminal box that connected with the wire,
disconnect the wire connector and replace the lamp.
• ILCOS D code for this lamp is: DBS-2/65-H-120/33
– LED modules –rectangle lamp
– Max wattage: 2 W
– Voltage range: AC 110-240V
– Dimensions:
 The bulb must be replaced by the manufacturer, its
service agent or similarly qualified persons.
 Always switch of f t he electricity s upply before
carrying out any operations on the ap pliance. When
handling bulb, make sure it is completely cool down
before any direct contact to hands.
 When handling globes hold with a cl oth or gloves to
ensure perspiration does not come in contact with
the globe as this can reduce the life of the globe.
10