Chicco 00007391100000 Manual De Instrucciones página 15

PROBLEMS AND SOLUTIONS
Problem
The steriliser does not finish the cycle / is noisy
The steriliser does not switch on.
The feeding bottles are stained at the end of
the sterilisation cycle.
N.B. IMPORTANT: If none of the solutions indicated above solves the problem, please contact Artsana Customer Service.
TECHNICAL FEATURES
Code: 00007391100000
Model: 06951_S
Power: 220-240V~ 50-60Hz
Power: 650 W
Made in China
THIS PRODUCT COMPLIES WITH THE DIRECTIVE 2012/19/EU.
The crossed bin symbol on the appliance indicates that the product, at the end of its life, must be disposed of separately from
domestic waste, either by taking it to a separate waste disposal site for electric and electronic appliances or by returning it to
your dealer when you buy another similar appliance. The user is responsible for taking the appliance to a special waste disposal
site at the end of its life. If the unwanted appliance is collected correctly as separate waste, it can be recycled, treated and
disposed of ecologically; this avoids a negative impact on both the environment and health, and contributes towards the recy-
cling of the product's materials. . For further information regarding the waste disposal services available, contact your local waste disposal
agency or the shop where you bought the appliance.
For the warranty for product defects see the specific provisions of applicable national laws in the country where purchased, if required. The
warranty does not cover components subject to normal wear and tear.
ARTSANA reserves the right to change information described in this manual at any time and without notice.
The reproduction, transmission, copying, as well as the translation into another language, of any part of these instructions, are absolutely
forbidden without the previous written authorization by ARTSANA S.p.A.
DECLARATION OF EC COMPLIANCE:
Artsana S.p.A hereby declares that this appliance, brand Chicco mod. 06951_S, complies with all the essential requirements and other
provisions set forth by the EU Directives 2014/30/EU (electromagnetic compatibility), 2014/35/EU (low voltage directive) and 2011/65/EU
(RoHS). A full copy of the EC declaration can be requested from Artsana S.p.A. Via S. Catelli 1 – 22070 Grandate (CO) Italy.
Possible Cause
Excessive limescale deposit on the heating
plate/container (e).
There is no power.
The plug is not connected properly.
The main ON/OFF switch (h) is in the 0 (OFF)
position.
Excessive limescale deposit on the heating
plate/container (e) or detachable base for
microwaves (i).
15
Solution
Clean the heating plate/container (e) by re-
moving the limescale with descaling solu-
tion (see the section "Removing limescale").
Check that there is power in the mains.
Verify that the plug has been connected
properly and that it is in good condition.
Move the main ON/OFF switch (h) to I (ON).
Clean the heating plate/container (e) by re-
moving the limescale with descaling solu-
tion (see the section "Removing limescale").