Chicco 00007391100000 Manual De Instrucciones página 14

steam or drops of hot water leaking out and causing burns.
Always wash your hands thoroughly before touching the objects
that have been sterilised.
10) Before starting a new sterilisation cycle, always wait until the
appliance has completely cooled down.
NOTE: In both configurations, FULL SIZE and COMPACT, the time
of the sterilisation cycle may vary depending on the number, size
and type of feeding bottles and accessories sterilised and the
quantity of water placed inside the heating plate/container (e).
NOTE: sterilised items will remain sterile inside the steriliser with
the lid (a) on for about 24 hours. If the lid (a) is removed during or
after use, the sterilisation status will be interrupted.
MICROWAVE configuration - APPLIANCE PLACED IN THE MI-
CROWAVE
SAFETY WARNINGS
WARNING!
- Glass feeding bottles can only be sterilised in microwave ovens
when this option is expressly declared in the product specifications.
In case of doubt, please contact your dealer or the manufacturer.
- The times and powers indicated in the table STERILISATION
TIMES AND POWERS must be strictly adhered to. Applying
shorter times and weaker powers does not guarantee an ef-
fective sterilisation, while applying longer times and stronger
powers could damage the steriliser together with its contents
and the microwave oven itself.
The appliance is assembled by placing the following compo-
nents one on top of another in order on the detachable base for
microwaves (i), rack unit (b) and lid (a).
In the MICROWAVE configuration, place the objects to be steri-
lised inside the appliance as indicated for the COMPACT configu-
ration (please see the first paragraph of the section "How to pre-
pare and use the appliance. Appliance connected to the mains
power supply - FULL SIZE
and COMPACT configurations).
1) Always carefully wash and rinse the objects to be sterilised
before placing them inside the steriliser.
2) Place the detachable base (i) inside the microwave oven.
3) Pour 80 ml of water into the central part of the detachable
base (i) (fig. 9).
WARNING: do not pour less water. In this case the water
may evaporate completely during heating with the risk of
damaging the steriliser's plastic components and rendering
sterilisation ineffective.
WARNING: do not pour more water. In this case, boiling
water may leak out of the product after sterilisation and
cause burns.
4) Place the objects to be sterilised inside the rack unit (see the
first paragraph of this section).
5) Close the rack unit with the relevant lid (a) and place it in the
microwave.
6) Set the power on the microwave following the instructions in
the table below.
STERILISATION TIMES AND POWERS
Minutes
3
4
5
7) When the sterilisation cycle is over, always use suitable
equipment to protect your hands from heat in extracting the
steriliser from the microwave.
8) Wait for at least a few minutes at the end of each sterilising
cycle, before removing the lid (a) and always do this carefully
to prevent boiling steam or drops of extremely hot water from
exiting the appliance and causing burns.
Power (Watt)
1000W +
Between 600W and 1000W
Between 440W and 600W
Always wash your hands thoroughly before touching the objects
that have been sterilised.
NOTE: sterilised items will remain sterile inside the steriliser with
the lid (a) on for about 24 hours. If the lid (a) is removed during or
after use, the sterilisation status will be interrupted.
14