Start-Up And Operation - Hama QI-FC10 Instrucciones De Uso

• Do not bend or crush the cable.
• Never apply force when using the product or during installation.
• Take care that components such as airbags, safety areas, controls, instruments, etc. and visibility are not
blocked or restricted.
• Ensure that the product is securely mounted before every journey.
• Do not allow yourself to be distracted by the product when driving a vehicle. Always pay attention to the
surrounding tra c and your environment.
• Always pull directly on the plug when disconnecting the cable, never on the cable itself.
Risk of electric shock
• Do not open the device or continue to operate it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains cable are damaged.
• Do not attempt to service or repair the product yourself. Leave any and all service work to quali ed
experts.
Do not place any bank or similar cards with magnetic strips
or magnetically sensitive objects on the product.
The data on the cards could be damaged or completely deleted.
Warning
Ensure that there are no metal parts (e.g. metal plate for magnetic holders) on the back of your device.
Metal heats up signi cantly in the eld of an induction charger and can damage your device and/or the
charger.

4. Start-up and operation

Warning
• Only operate the product from a socket that has been approved for the device. The socket must be
installed close to the product and must be easily accessible.
• Disconnect the product from the power supply using the On/Off switch – if this is not available, unplug
the power cord from the socket.
• If using a multi-socket power strip, make sure that the total power consumption of all connected devices
does not exceed the power strip's maximum throughput rating.
• If you will not be using the product for a prolonged period, disconnect it from mains power.
Note
• To be able to charge your device via the wireless charger, it must be compatible with induction charging
technology. Please refer to the operating instructions of your device for more information.
• Note that mobile phone cases, covers, etc., and other materials between the wireless charger and the
back of your device may interfere with or even prevent the charging process.
• Connect the enclosed USB-C cable to the USB-C input (1) of the inductive charger and a suitable USB
charger. When doing so, consult the operating instructions for the USB charger.
Note
• The maximum charging power of up to 10 W is only achieved with a Qualcomm quick charging device
(5 V / 2 A, 9 V / 1.67 A).
• An active power supply is con rmed by the status LED (2) brie y lighting up red.
Warning
Do not use defective chargers or USB ports and do not attempt to repair them.
7