Adjusting The Handlebar; Folding The Handlebar; Starting And Stopping The Engine; Checking The Lawn Mower - Stihl RM 448 VC Manual De Instrucciones

English
► Release lever (2) and ensure that handle‐
bar (1) fully engages.
Handlebar (1) is firmly attached to the lawn
mower.
► Press control bar for mowing (6) to handle‐
bar (1) and hold.
► Slowly pull starter handle (7) in the direction of
starter rope guide (8).
► Hook starter handle (7) into starter rope
guide (8).
► Release control bar for mowing (6).
► Re-attach the spark plug socket.
8.2

Adjusting the Handlebar

► Stop the engine.
► Detach the spark plug socket.
► Place the lawn mower on a level surface.
► Hold handlebar (1).
► Press lever (2) downwards and hold.
► Move handlebar (1) into the desired position.
► Release lever (2) and ensure that the handle‐
bar fully engages again.
8.3

Folding the Handlebar

The handlebar can be folded for space-saving
transport or storage.
► Stop the engine.
► Detach the spark plug socket.
► Place the lawn mower on a level surface.
► Press the control bar for mowing to the han‐
dlebar and hold.
► Detach the starter handle from the starter rope
guide and slowly guide back towards the
engine.
► Release the control bar for mowing.
30

9 Starting and Stopping the Engine

► Hold the handlebar and keep the lever
pressed.
► Fold down the handlebar forwards.
9 Starting and Stopping the
Engine
9.1 Starting the Engine
► Place the lawn mower on a level surface.
► Press control bar for mowing (1) to handle‐
bar (2) with the left hand and hold.
► Slowly pull out starter handle (3) to the point of
noticeable resistance with the right hand.
► Keep quickly pulling out and returning starter
handle (3) until the engine is running.
► If the engine does not start: see the engine
instruction manual.
9.2 Stopping the Engine
► Place the lawn mower on a level surface.
► Release the control bar for mowing.
The engine stops.
► Leave the user position.

10 Checking the Lawn Mower

10.1

Checking the Controls

Control bar for mowing and control bar for self-
propulsion
► Stop the engine.
► Pull the control bar for mowing and the control
bar for self-propulsion fully in the direction of
the handlebar and release again.
► If the control bar for mowing or the control bar
for self-propulsion is stiff or does not spring
back into the initial position: do not use the
lawn mower and consult a STIHL specialist
dealer.
The control bar for mowing or the control bar
for self-propulsion is defective.
10.2

Checking the Blade

► Stop the engine.
► Detach the spark plug socket.
► Upend the lawn mower,
15.1.
0478-111-9904-A