Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Installation
Cabinet installation
•
Open the door on the cabinet and take out the connection pack.
•
Place the cabinet (10) in the desired position.
•
Position the fixed bars (11) at the bottom of the cabinet.
•
Mark the place for the holes where the expansion bolts (12) will be inserted
to secure the fixed bars.
•
Move away the cabinet.
•
Use a 12mm electric drill to make the holes marked previously. The depth
of the hole should be between 110-120mm.
•
Place the expansion bolts.
•
Move the cabinet back to its position and position the fixed bars at the
bottom, inside the cabinet.
•
Tighten the expansion bolts.
Fig. 3
5
User manual
Tabla de contenido
