PNI BPL505S Manual De Usuario página 14

Close limit
Figure 15: First adjust points A, B, C so that they are on the same line. Make
sure the boom is perpendicular to the ground.
Figure 16: Adjust the small outer metal sheet with a cross screwdriver to block
the right photoelectric switch.
Then tighten the compression nut.
Fig.15A
For right closing
Open limit
Figure 13: First adjust points A, B, C so that they are on the same line. Make
sure the boom is perpendicular to the ground.
Figure 14: Adjust the small inner metal sheet with a cross screwdriver to block
the left photoelectric switch.
Fig.17
A
B
C
User manual
Fig.16
compression nut
A
C
B
Fig.18
exterior small sheet
interior small sheet
14
exterior small sheet
interior small sheet
compression nut