Attach The Printing System; Connect The Printing System - Valentin SPE II Guía De Referencia Rápida

SPE II

Attach the Printing System

A
B
B
B
C
B
B

The printing system (C) is mounted on a suitable supporting structure (A) with five M5 fixing screws.
CAUTION!
Damage to the printing system due to insufficient fastening. There is a danger that the printing system will fall out
of the supporting structure – if the printing system is not properly attached. This can cause injuries.

For proper operation, the printing system must be attached on a supporting sctructure.

Use suitable screws that can support the weight of the printing systam.

Connect the Printing System

The printing system is equipped with a versatile power supply unit. The device may be operated with a mains voltage of
240 V AC / 50-60 Hz without any adjustments or modifications.
CAUTION!
The printing system can be damaged by undefined switch-on currents.

Set the power switch to '0' before plugging in the printing system.

Insert the power cable into the power connection socket.

Insert the plug of power cable into a grounded electrical outlet.
NOTICE!
Insufficient or missing grounding can cause faults during operation.
Ensure that all computers and connection cables connected to the printing system are grounded.

Connect the printing system to a computer or network with a suitable cable.
74 English