Battery Disposal - Andis CLC-4 Instrucciones De Uso Y Cuidado

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

3. Do not store clipper under 50°F or over 104°F. Do not expose clipper to excessively
damp conditions.
4. Avoid locating the clipper near heat vents, radiators, or in direct sunlight. Optimum
charging will result where the temperature is stable. Sudden increases in
temperature can result in the battery receiving less than a full charge.
5. Many factors influence lithium-ion battery life. A battery that has received heavy
use or is more than a year old may not give the same run-time performance as a
new battery pack.
6. New lithium-ion batteries, unused for a period of time, may not accept a full charge.
This is normal and does not indicate a problem with the battery or charger. The
battery will accept a full charge after several cycles of clipper use and recharging.
7. Disconnect the adapter cord from the AC outlet if extended periods of non- use are
anticipated.

BATTERY DISPOSAL

The product you have purchased contains a rechargeable battery. The
battery is recyclable. At the end of its useful life, under various state and
local laws, it may be illegal to dispose of this battery into the municipal
waste stream. Check with your local solid waste officials for details in
your area for recycling options or proper disposal. Check with your local
solid waste officials (or call 1-800-822-8837) for details in your area for recycling options
or proper disposal.
FACTORY REPAIR SERVICE
When the blades of your Andis clipper become dull after repeated use, it is advised
to purchase a new set of blades available through your Andis supplier or through
an Andis authorized service station. If you wish your clipper to be serviced as well,
it should be carefully packed and mailed either Parcel Post Insured, or U.P.S. to any
Andis authorized service station. To find an Andis authorized service station
near you log on to andis.com or contact our customer service department at
1-800-558-9441.
CAUTION: Never handle your Andis clipper while you are operating a water faucet, and never
hold your clipper under a water faucet or in water. There is danger of electrical shock and
damage to your clipper. Andis Company will not be responsible in case of injury due
to this carelessness.
7
Tabla de contenido
loading

Tabla de contenido