auna Connect CD MKII Manual De Instrucciones página 67

Setting an alarm
1. Press and hold the Menu button on main unit or remote control and turn
and press the NAVIGATE dial to select 'Main Menu'.
2. Turn and press the NAVIGATE dial to select 'Alarms'.
3. Turn and press the NAVIGATE dial to select 'Alarm 1' or 'Alarm 2'.
4. Turn the NAVIGATE dial to scroll through each alarm setting. If you want
to change a setting, press the NAVIGATE dial. You can set the following
alarm options:
Enable Turn and press the NAVIGATE dial to choose when
you want the alarm to repeat. The available options
are 'Off ','Daily', 'Once', 'Weekends' or 'Weekdays'.
Time Turn and press the NAVIGATE dial to adjust the
hour of the alarm. Note: If you have set to use the
12 hour time format, make sure that you select the
'AM' or 'PM' version of the hour before pressing the
NAVIGATE dial. Repeat to set the minutes of the
alarm.
Mode Turn and press the NAVIGATE dial to choose between
'Buzz', 'Internet radio', 'DAB', 'FM' , 'CD', 'USB'.
Volume Turn and press the NAVIGATE dial to set the volume
when the alarm sounds.
Save Turn and press the NAVIGATE dial to save the alarm.
Time and date settings
The clock will automatically set itself using your Network, digital or FM
radio signal. If the time or date does not update automatically, you can
manually set it using this option.
Note: Any time or date updates received by a digital broadcast will override
manual settings.
Setting the time and date manually
1. Press and hold the Menu button to view the main menu.
2. Turn and press the NAVIGATE dial to select 'System settings' > 'Time/
Date'.
3. Turn and press the NAVIGATE dial to choose 'Set Time/Date'.
4. Turn and press the NAVIGATE dial to set the day of the month. Repeat to
set the month and year.
5. Turn and press the NAVIGATE dial to set the hour. Repeat to adjust the
minutes.
EN
67