System Connections - auna Connect CD MKII Manual De Instrucciones

SYSTEM CONNECTIONS

1. Fit the correct pin connector to the supplied mains power adapter.
2. Unclip the aerial and fully extend it (steps A and B).
Insert the jack of the supplied mains adapter into the socket on the rear of
the radio (C).
Plug the mains adapter into the mains supply (D)
3. The first time you switch on you will be asked if you would like to run the
setup wizard, which will help you connect to your network. If you want
to run the setup wizard now, turn and press the NAVIGATE dial to select
'Yes' and follow the prompts on screen. To set up later, turn and press
the NAVIGATE dial to select 'No'.
Note: For more information on using the setup wizard see the related
chapter.
Note: Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
EN
51