Idiomas disponibles
Idiomas disponibles
Using your polishing head
Using your polishing head
DO NOT USE ON CARPET
DO NOT USE ON CARPET
-Take care not to slip over when polishing floors,
they can become very slippery in the process.
-Take care not to slip over when polishing floors,
they can become very slippery in the process.
-Only use dedicated floor products, other
inappropriate detergents or types of polish could
-Only use dedicated floor products, other
leave the floor dangerously slippery.
inappropriate detergents or types of polish could
leave the floor dangerously slippery.
-Do not leave the product operating in one area for
a prolonged period of time as this may damage
-Do not leave the product operating in one area for
your floor surface.
a prolonged period of time as this may damage
your floor surface.
Applying floor treatments
Applying floor treatments
-The recommended floor treatment is Ewbank®
Floor Polish, which has been specifically developed
-The recommended floor treatment is Ewbank®
to complement the EPV1100. Ewbank® Floor
Floor Polish, which has been specifically developed
Polish is available from Ewbank® retail stockists,
to complement the EPV1100. Ewbank® Floor
from the Ewbank® website
Polish is available from Ewbank® retail stockists,
www.ewbankus.com or by calling 855-439-2265.
from the Ewbank® website
www.ewbankus.com or by calling 855-439-2265.
-Always read and follow the manufacturerʼs
instructions.
-Always read and follow the manufacturerʼs
instructions.
-Apply the treatment directly to the floor unless
instructions indicate otherwise.
-Apply the treatment directly to the floor unless
instructions indicate otherwise.
Scrubbing / cleaning the floor
Scrubbing / cleaning the floor
-Heavily soiled surfaces may require the brush
attachments are used initially to loosen any debris.
-Heavily soiled surfaces may require the brush
Otherwise ensure that the white scrubbing pads
attachments are used initially to loosen any debris.
are attached (see page 4).
Otherwise ensure that the white scrubbing pads
are attached (see page 4).
-Use the white scrubbing pads with floor cleaner or
Ewbank® Floor Polish to remove stubborn stains
-Use the white scrubbing pads with floor cleaner or
or old treatments from the floor surface.
Ewbank® Floor Polish to remove stubborn stains
or old treatments from the floor surface.
-Turn the product on at the power socket and
select the correct setting selected on the power
-Turn the product on at the power socket and
button. The default setting is off. Press down and a
select the correct setting selected on the power
light will show on the front of the unit, this means
button. The default setting is off. Press down and a
the polisher is on and the vacuum is off. Press
light will show on the front of the unit, this means
down again the polisher and vacuum will be on.
the polisher is on and the vacuum is off. Press
down again the polisher and vacuum will be on.
-With your foot securing the head of the polisher on
the floor (1), pull the handle towards you (2) and
-With your foot securing the head of the polisher on
the product will start (Fig.9). Returning the handle
the floor (1), pull the handle towards you (2) and
to its upright position will stop the product.
the product will start (Fig.9). Returning the handle
to its upright position will stop the product.
Fig.9
Fig.9
2.
Pull back
2.
to start
Pull back
to start
5
5
5
1.
Place foot
1.
on base
Place foot
on base
