Electrolux GC58V Manual De Instrucciones página 24

Installing your Cooktop
The installation in the furniture should be done as
follows:- Remove the grills and burners.
- Place the cooktop with the bottom facing up into
the top EPS cover. Be careful not to damage the
spark plugs.
- Glue the sealant strip supplied at the end of
the metal surface (GT60X and GT75X) or glass
surface (GC58V, GC70V and GC75P).
- Put the cooktop on the furniture, taking care that
the rubber is not exposed.
- Place the grills and burners.
24
About Cabinet with Doors or Drawer
If you decide not to install any appliance under the
cooktop, it is necessary to install a partition at a
distance of 150 mm from the table.
This partition will be a passage to gas hose and
power cable. The material used in the manufacture
of this partition must be heat resistant. Ex: wood
(figure 4).
PARTITION WITH OPENINGS
TO PASS THE HOSE AND
THE POWER CABLE
About Cabinet with Built-In Oven
To avoid overheating, the installation must be done
according to figure 5, respecting the space for air
circulation. Electrical connections must be made
separately.
BUILT-IN OVEN
AIR CIRCULATION
Installation of cabinets, hoods and
debugers
The installation of cabinets, hoods and debuggers
must be at least 800 mm above the cooktop
(figure 1).