Idiomas disponibles
Idiomas disponibles
Installation Instructions
4
4
5
(D) x 4
(E) x 4
3
2
All manuals and user guides at all-guides.com
(F) x 4
1
INSTALL ANCHORS
1.
Install one anchor (F) into each of the four pilot
holes.
CAUTION:
IMPROPER INSTALLATION CAN
LEAD TO MOUNT FALLING CAUSING SERIOUS
PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! Make sure flange on anchor is flush
against wall.
SECURE MOUNT TO STUDS
WARNING:
IMPROPER INSTALLATION CAN
LEAD TO MOUNT FALLING CAUSING SERIOUS
PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! It is the installer's responsibility to
make sure the structure to which the mount is
being installed is capable of supporting five times
the combined weight of the mount and all
attachments.
1.
Place mount over anchors and align mounting
holes in wall plate with holes in anchors.
2.
Place flat washer (D) onto hex head capscrew
(E).
3.
Insert hex head capscrews (E) with flat washer
(D) through mounting hole in display mount and
into anchor (F) and tighten until flush against
mount. DO NOT overtighten!
WARNING:
IMPROPER INSTALLATION CAN
LEAD TO EQUIPMENT FALLING CAUSING
SERIOUS PERSONAL INJURY OR DAMAGE TO
EQUIPMENT! Overtightening of mounting
hardware can damage mounting surface. DO NOT
overtighten mounting hardware!
4.
Complete installation by followintg the
instructions included with the mount.
iCLPAC1
13
