Klarstein BARELLA Manual página 29

Activated carbon filter
Activated carbon filters can be used to remove odors. Normally, the charcoal filter
should be changed after three or six months, depending on your cooking habits. The
installation of the activated carbon filter is carried out as follows:
1. Disconnect the hood from the main power supply before installation.
2. Press the filter cap and remove the net filter.
3. Turn the carbon filters counterclockwise on both sides of the motor. Replace the old
carbon filters with new carbon filters.
4. Replace the net filter.
5. Reconnect the power plug to the wall outlet.
Note: Make sure that the filter is tightly closed. Otherwise, it can break loose and
become dangerous. When the activated carbon filter is connected, the suction power
is reduced.
close
open
EN
29