Initial Startup Primus 2 H2N/H2N; Power Supply Safety Instructions; General Power Supply Notes; Operating The Laser With Rechargeable Batteries - Nedo PRIMUS2 H2N Manual De Instrucciones

EN Operating instructions
5

Initial Startup PRIMUS 2 H2N/H2N+

5.1 Power supply safety instructions

WARNING!
Destruction! Explosion risk!
f Use charger included in the scope of delivery only.
f Do not insert
CAUTION!
Damage!
f Do not mix dead and fully charged batteries.
f Do not place rechargeable batteries or batteries on radiators or store them in the sun.

5.2 General power supply notes

Use the charger in dry rooms only.

5.3 Operating the laser with rechargeable batteries

Rechargeable battery
pack is pushed in

5.4 Operating the laser with batteries

When delivered, the rechargeable battery pack is inserted, the laser is ready
for use. Replace rechargeable battery pack. as follows:
Release rechargea-
ble battery pack /
battery compartment
locking device
Lock battery com-
partment
ENVIRONMENT
Batteries are special waste and may not be put into domestic waste. They must be
properly disposed of according to the respective national guidelines.
batters in the rechargeable battery pack and charge with the charger.
Connect charger
Pull out rechargeable
battery pack / batte-
ry compartment
1 Connect charger to rechargeable battery
pack.
2 Connect charger to mains supply.
Note voltage! (110-230 V)
Charging time for complete charging:
12-14 h.
During charging, the LED above the char-
ger socket lights up in the rechargeable
battery pack.
Operation possible during the charging
process (charging time lengthened).
Note pole position!
Insert batteries into Push in battery
battery compartment compartment
31