KitchenAid KSMSIA Manual página 6

PRODUCT USAGE
5
Insert the Main Housing into the
attachment hub, make sure the power
shaft fits into the square hub socket. If
necessary, rotate the attachment back
and forth for proper fitment. The pin on
the attachment housing will fit into the
notch of the hub rim when in the proper
position.
7
Ensure that the upper lever of the
housing is rotated all the way to left. If
not, rotate it to the left until it clicks into
place. This will ready the attachment
for use and must be completed before
loading the Ice Puck into the Ice Cup and
attaching it to the housing.
OPTIONAL : If you wish to change the
blade, grip the blade from the bottom
and rotate it to right to unlock and remove.
6
W11499125A.indb 6 W11499125A.indb 6
6
Tighten the Stand Mixer attachment hub
knob clockwise until the attachment is
completely secured into the Stand Mixer.
8
Remove the Ice Cup from the housing
by rotating it to the right and pulling
downward. Take note of the small
indicator arrow which must line up with
the Lock and Unlock symbols on the
housing.
10/14/2021 12:55:10 PM 10/14/2021 12:55:10 PM