English (Original Instructions) - DeWalt DW733 Traducido De Las Instrucciones Originales

HEAVY‑DUTY PORTABLE THICKNESS PLANER
DW733
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough product development and
e
innovation make D WALT one of the most reliable partners for professional power tool users.
e
Technical Data
Voltage
Frequency
Type
Power input
No load speed
Feed speed
Cutting height (max.)
Cutting height (min.)
Cutting width (min. – max.)
Max. cutting depth (for max. board width of 127 mm)
Weight
Noise values and vibration values (triax vector sum) according to EN61029:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration and/or noise emission level given in this information sheet has been measured in
accordance with a standardised test given in EN61029 and may be used to compare one tool
with another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission level represents the main
applications of the tool. However if the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or noise should also take
into account the times when the tool is switched off or when it is running but not
actually doing the job. This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organisation of
work patterns.
nOtE: This device is intended for connection to a power supply system with maximum
permissible system impedance Zmax of 0.17 Ω at the interface point (power service box) of
user's supply.
The user has to ensure that this device is connected only to a power system which fulfils the
requirement above. If necessary, the user can ask the public power supply company for the
system impedance at the interface point.
EC‑Declaration of Conformity
Machinery Directive
Heavy‑Duty Portable Thickness Planer
DW733
WALT declares that these products described under Technical Data are in compliance with:
D
e
2006/42/EC, EN61029‑1:2009 +A11:2010, EN61029‑2‑3:2011.
These products also comply with Directive 2014/30/EU and 2011/65/EU. For more information,
please contact D WALT at the following address or refer to the back of the manual.
e
The undersigned is responsible for compilation of the technical file and makes this declaration
on behalf of D WALT.
e
Markus Rompel
Vice‑President Engineering, PTE‑Europe
D WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
09.07.2021
THE SUPPLY OF MACHINERY (SAFETY) REGULATIONS 2008
DW733
V 230
AC
Hz 50
D WALT declares that these products described under "technical data" are in compliance with:
e
11
The Supply of Machinery (Safety) Regulations, 2008, S.I. 2008/1597 (as amended),
W 1800
EN61029‑1:2009 +A11:2010, EN61029‑2‑3:2011
min ‑1 10000
These products conform to the following UK Regulations
m/s 0.13
Electromagnetic Compatibility Regulations, 2016, S.I.2016/1091 (as amended).
mm 152
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic
Equipment Regulations 2012, S.I. 2012/3032 (as amended).
mm 3.2
For more information, please contact D
mm 64–315
the manual.
mm Softwood: 3.2
The undersigned is responsible for compilation of the technical file and makes this declaration
Hardwood: 2.8
on behalf of D WALT.
e
kg 36.2
dB(A) 91.5
dB(A) 102.2
dB(A) 2.5
Karl Evans
Vice President Professional Power Tools EANZ GTS
D WALT UK, 270 Bath Road, Slough
e
SL1 4DX
England
09.07.2021
WARNING: To reduce the risk of injury, read the instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each signal word. Please read the
manual and pay attention to these symbols.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result
in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result
in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury which, if not avoided, may
result in property damage.

Denotes risk of electric shock.

Denotes risk of fire.
Safety Instructions
WARNING: When using electric tools basic safety precautions should always be followed
to reduce the risk of fire, electric shock and personal injury including the following.
Read all these instructions before attempting to operate this product and save these instructions.
General Safety Rules
1 . Keep work area clear.
- Cluttered areas and benches invite injuries.
2 . Consider work area environment.
- Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the
work area well lit (250–300 Lux). Do not use the tool where there is a risk of causing fire or
explosion, e.g., in the presence of flammable liquids and gases.
3 . Guard against electric shock.
- Avoid body contact with earthed surfaces (e.g., pipes, radiators, cookers and refrigerators).
When using the tool under extreme conditions (e.g., high humidity, when metal swarf is
being produced, etc.), electric safety can be improved by inserting an isolating transformer
or a (FI) earth-leakage circuit-breaker.
4 . Keep other persons away.
- Do not let persons, especially children, not involved in the work, touch the tool or the
extension cord and keep them away from the work area.
5 . Store idle tools.
DECLARATION OF CONFORMITY
Heavy‑Duty Portable Thickness Planer
DW733
WALT at the following address or refer to the back of
e
SAVE THIS MANUAL FOR FUTURE REFERENCE
EngLIsh
15