Master Pumps MPXP801 Traducción De Las Instrucciones Originales página 20

Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXP801PC
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXI1101PC
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXI1101ALL
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
3 mm
4,8 bar
5° C
40° C
40
230 V ~ 50
800 Watt
IP X4
1"
1"
3.200 l/h
40 m
8 m
1,5 m H07 RNF
10,6 Kg
3 mm
4 bar
5° C
40° C
40
230 V ~ 50
1100 Watt
IP X4
1"
1"
4.600 l/h
45 m
8 m
1,5 m H07 RNF
11,5 Kg
3 mm
4,5 bar
5° C
40° C
40
230 V ~ 50
1100 Watt
IP X4
1"
1"
4.600 l/h
45 m
20
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
The sound power pressure may
exceed 85 dB(A), in this case
individual hearing protection
Weighted root mean square acceleration according
to relevant standard. : :< 2.5 m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration total
value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
3 Installation (see Fig. 1)
DANGER
Electric shock risk
Protect the electropump and all
pipes from bad weather or
freezing conditions
WARNING
To prevent possible injuries to
people, avoid inserting hands
into the mouth of the DANGER
pump if this is connected to the
DANGER
8 m
1,5 m H07 RNF
14 Kg
3 mm
4,5 bar
5° C
40° C
40
ATTENTION !
must be worn.
When installing, please
ensure electropump is
disconnected from
electrical supply.
mains.