Master Pumps MPXP801 Traducción De Las Instrucciones Originales página 19

This water pump may not be exposed for long
periods to impurities, sand, stone, sticky
substances, etc., mixed in with the conveyed media.
Because the conveyed media may contain chemical
corrosive substances, it is necessary to pay special
attention to preventing influence by these on the
material of the pump body. It is not permitted to use
this water pump to convey drinking water.
This appliance cannot be used by
children or people who are
mentally or developmentally
impaired, or people who lack
knowledge, except in case these
people receive instruction from a
person responsible for their
safety, a supervisor, or by
studying the preceding
instructions concerning use of
WARNING: Packaging materials
are not toys! Children must not
play with plastic bags! Danger of
2 Limitations
BOOSTER SETS MASTER PUMPS are suitable for
domestic use, to pump clean water at constant
pressure; to supply water for domestic use from
wells and cisterns; to supply water for toilets,
washing machines and dish washers and to water
gardens. They can also be used for pressurisation
systems to increase hydrostatic pressure.
The pump cannot be used for sea
water and inflammable, corrosive,
explosive or dangerous liquids.
WARNING
Verify that the electropump never
runs without liquids.
WARNING
Technical Data
MPXP801
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
physically,
experience or
this appliance.
suffocation!
230 V ~ 50
800 Watt
IP X4
1"
1"
3.200 l/h
40 m
8 m
1,5 m H07 RNF
10 Kg
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXI1101
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXP801ALL
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
Maximum dimension of pumped solid particles
Maximum admitted working pressure
Minimum ambient temperature
Maximum ambient temperature
Maximum temperature of the pumped fluid 50° C
Maximum number of starts per hour, uniformly
distributed
MPXI1301ALL-I
Mains voltage / frequency
Absorbed power
Type of protection / Insulation class
Suction fitting
Delivery fitting
Maximum flow rate
Maximum head
Maximum suction height including load losses
Power cable
Weight
19
3 mm
4 bar
5° C
40° C
40
230 V ~ 50
1100 Watt
IP X4
1"
1"
4.600 l/h
45 m
8 m
1,5 m H07 RNF
10 Kg
3 mm
4,5 bar
5° C
40° C
40
230 V ~ 50
800 Watt
IP X4
1"
1"
3.200 l/h
40 m
8 m
1,5 m H07 RNF
13 Kg
3 mm
4 bar
5° C
40° C
40
230 V ~ 50
1300 Watt
IP X4
1"
1"
4.800 l/h
48 m
8 m
1,5 m H07 RNF
15 Kg