Battery Power Indicator - JBM 60038 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

REF. 60038

SAFETY INSTRUCTIONS FOR THE BATTERY AND

CHARGER

• Never attempt to open or disassemble for any re-

ason.

• Do not expose the battery and/or charger to water

or rain

• Keep the battery away from other metal objects

while not in use.

• Avoid contact if the battery ejects any liquid and

ventilate the working area if it emits any kind of

vapors.

• Do not use the cord to carry the charger or to

unplug it from power supply.

• Do not use a charger with a damaged cord.

Charging

• Charge only at ambient temperatures between 10

°C and 40 °C

• Do not charge inside a box or container of any

kind. The battery must be placed in a well-ventila-

ted area during charging.

• Do not overcharge the battery. Once the battery

is fully charged, disconnect the charger from the

power.

Storage

• If the appliance is to be stored unused for a long

period, the batteries should be removed from the

tool.

• Do not store in locations where the temperature

may exceed 40 °C.

Transport and disposal

• Place the battery inside the package in a way it

remains fixed in the same position and it cannot

move.

• Do not dispose the power tools and batteries into

household waste!

• Consult your local authorities concerning the

transport and disposal options.

ASSEMBLY OF THE BATTERY

CAUTION! Make sure the power tool is turned off

before inserting or removing the battery pack.

Battery charging

NOTE: Before the first use, newly purchase battery

packs are not fully charged, and must be charged be-

fore inserting them to the cordless tool.

1. If the Lithium-Ion battery is empty, the power tool

automatically switches off by means of a protecti-

ve circuit.

2. Do not continue to press the On/Off button after

the automatic shutdown of the power tool.

Installing the battery

1. Align the raised ribs on the battery pack with the

slots at the bottom of the power tool.

2. Slide the battery pack

into the tool.

3. Make sure the latches on each side of the battery

pack snap in place and securely attach to the tool.

Removing the battery

1. Press the battery

release button.

2. Pull the battery pack out

towards the rear of the power

tool without making any force.

CHARGING WITH DIAGNOSTIC CHARGER

1. Connect the battery charger into the AC power su-

pply.

2. Slide the raised ribs on the battery pack into the

slots on the charger until the latches on each side

of the battery pack snap in place.

3. Once the battery is properly attached, the LED's

on the charger will light up indicating the charging

status.

There are 5 different color combinations possible:

Steady red light

+ flashing green

light

Steady red light

+ steady green

light

Flashing red light

Red and green

light flashing

alternatively

NOTE! In case of "defective" status, try removing

and inserting the battery again into the charger, and do

the same with another new battery. If the same status

remains, it may be the case that the defective item is

the charger and not the battery.

4. Press the latches on each side of the battery pack

and slide it off from the charger to remove it.

5. Disconnect the charger from the power supply.