Getting Started; Charging The Battery - BWT BC Serie Manual Del Usuario

GETTING STARTED

Charging The Battery

IMPORTANT NOTE: Fully charge the pool vacuum (about 6 hrs) before
using it for the first time.
WARNING!
 KEEP YOUR FINGERS AWAY FROM THE OPENING TO AVOID BEING
HIT BY THE IMPELLER WHEN IT'S ON.
 Use only the original external adaptor and charging cable provided.
 Make sure the pool vacuum and the charging port are clean and dry before
set-up and charging. (TIPS: use a cotton bud to dry the charging port and
charging pins)
 The charging pins are waterproof. However, remnants of water in the port
and around the pins could result in natural occurrence of stains (a
byproduct of chemical reaction between water and electric currents).
Otherwise, the stains can be removed by light scrubbing with a cotton bud
soaked with juice of lemon or vinegar.
1. Place the unit on a flat surface. Set the pool vacuum to Power Off/
Charging Mode by turning the switching knob anticlockwise until it clicks
and completely exposes the charging port.
Align and attach the charging cable to the charging port. WARNING! Be
2.
sure not to invert the charging cable and ensure both the charging cable
and charging port are clean and dry before charging them. TIPS: Use
cotton bud to dry the charging port and pins. Connect the external
adaptor's cable plug to the charging cable's port.
4/155