SEVERIN WK 3342 Instrucciones De Uso página 11

power cord, it must no longer be used:
even invisible damage may have adverse
effects on the operational safety of the
appliance.
∙ The appliance must be used only on a
heat-resistant, level surface.
∙ Do not operate the appliance below a
hanging cupboard or similar object; there
is a risk that escaping steam may be
trapped underneath.
∙ The exterior surfaces become hot during
use and will remain so for some time
afterwards.
∙ Do not allow the appliance or its power
cord to come into contact with open
fl ames or any hot surfaces such as hot-
plates.
∙ Do not let the power cord hang free, and
keep the cord well away from hot parts of
the housing.
∙ Always remove the plug from the wall
socket,
- in case of any malfunction,
- after use,
- during cleaning.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Thermal safety cut-out
The preset thermal safety cut-out protects
the heating element from overheating should
the appliance be erroneously switched on
without any water, or if the heating element
is calcifi ed. Once the safety cut-out has
switched off the kettle, it must be allowed to
cool down suffi ciently, or must be descaled
before it is switched on again.
Before using for the fi rst time
To clean the kettle, boil and discard the fi rst
All manuals and user guides at all-guides.com
fi lling of water.
Boiling water
∙ Remove the water container from its base.
∙ Push the release button to open the lid,
∙ Close the lid and replace the container on
Info: Once the appliance is connected to
the mains or the container is placed on its
base, the temperature selection buttons light
up briefl y in the sequence red-green.
∙ To turn the appliance on, use the
∙ The heating process begins.
∙ As soon as a certain temperature level
∙ After reaching boiling point (or the
∙ Around 30 seconds after the appliance
∙ To interrupt the heating process, the
∙ To pour hot water, remove the container
∙ To prevent hot steam from being emitted,
and fi ll the container with water to the
desired level, observing the Min. and
Max. markings.
its base. Insert the plug into a suitable
wall socket.
appropriate button, which will start
fl ashing red. During the heating period,
the temperature can be changed at any
time.
has been reached during the heating
process, the corresponding temperature
selection button shows a green light.
selected temperature), the appliance
switches off automatically. A triple beep
signal is heard and the corresponding
button shows a steady light.
has switched off, the temperature button
indicator lights will also go out.
appliance can be switched off by pressing
the appropriate temperature button again.
from its base.
ensure that the lid remains closed while
pouring out the water.
11