Ardo bellis Instrucciones De Uso página 11

Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.
4
The vacuum and the cycle can be increased using the
particular button, the intensity of the vacuum or cycle is changed by one step or bar.
5
After two minutes, the stimulation mode
a) If the breast milk starts to flow before this, press the mode button
mode.
b) If the let-down reflex has not been triggered after the preset two minutes, press the mode button
the stimulation by another two minutes.
6
The breastpump is in expression mode.
This can be seen by the lower segment of the mode button that lights up green.
7
Adjust the vacuum (suction level) and the cycle (suction frequency) to what is comfortable for you.
The vacuum and the cycle can be increased using the
particular button, the intensity of the vacuum or cycle is changed by one step or bar.
Expressing is most successful if you select the vacuum and cycle settings that are comfortable for you.
The timer starts automatically when the Ardo Bellis is switched on and continuously displays the
8
expressing time.
9
Massage the breast while expressing. This increases the volume of milk expressed.
10
By holding down the On/Off button
4.4.2 Silent Start
If the Ardo Bellis is switched on but not connected to a pumpset, it runs very quietly without pumping.
When the pumpset is inserted, you can start to express (see Chapter 4.4).
4.5 Memory function—Individual expressing at the touch of a button
You have found your ideal settings when your breast milk flows freely and you can express most successfully. Activating the
memory button saves your expression history. When you next switch the breastpump on, you can automatically express
using the saved expression history in the stimulation mode and then in expression mode. The Ardo Bellis breastpump stops
automatically after the saved time.
button or decreased using the
switches automatically to the expression mode
button or decreased using the
, you can switch off the breastpump.
button. By pressing the
.
to manually switch to the expression
button. By pressing the
en
to extend
7