Quick Setup; Installation Notes - Montarbo WIND PRO Serie Manual De Uso

WIND PRO

QUICK SETUP

10
Qualifi ed personnel should prepare the necessary cabinets
(at least 2 skilled operators are required). Use the offi cial
accessories (Earth Pro 115 118 transport cart for correct
handling)
In case of multiple elements (WIND PRO), hook the vertical
plates on the side (possible angles between the cabinets: 0°-
5°-10°-15°).
Finally, connect the flybars (for heads or subs), depending
on the confi guration required. Installation is carried out by
releasing the flybar cams and inserting them into the seats of
the boxes. The unit is fi xed on the side by means of safety pins.
32
Make audio, network and power connections
Complete the installation according to the fi nal setup and
connect in remote control for use with M-Connect software

INSTALLATION NOTES

11
Earth Pro 115A - 118A transport carts allow handling Earth 115 and
118 subwoofers up to a maximum load of 150 kg / 330.6 lbs.
Flybars EP115 - 118 allow the flown installation of Earth PRO
subwoofers up to a maximum load of 265 kg/584 lbs. Installation
is carried out by releasing the flybar cams and inserting them into
the seats of the boxes. The unit is then fi xed on the side by means of
safety pins.
Flybars WP212 - 215 allow the flown installation of Wind PRO
speakers up to a maximum load of 160 kg/352 lbs. Installation is
carried out by releasing the flybar cams and inserting them into the
seats of the boxes. The unit is then fi xed on the side by means of
safety pins.
The WP212 / WP215 vertical plates allow FLY connection kits allow the coupling of 2 subs or a sub and a head,
installation of two Wind PRO 212A-215A speakers depending on the type of confi guration chosen.
in flown confi guration, depending on the model,
with maximum load of 100 kg/220 lbs at the
following angles: 0°, 5°, 10°, 15°.
User manual
33