Blade Lubrication; Blade Tightness Adjustment - Active TIGERCUT 35 Manual Del Usuario

18. Do not use any leaky battery.
19. Keep the battery away from children's reach.
20. Do not use or place the battery under the sun (or direct sunlight), other- wise it may
cause the battery to overheat and catch re, which will result in functional failure and
shortened life.

Blade lubrication

The power supply of the trimmers must be disconnected before operation.
The blade should always be lubricated before use or after being used for more than 4
hours. The correct way to lubricate is to open the blade. For lubrication, use lithium
spray grease.
Procedure:
The lubricant inlet hole is indicated by the arrow. Insert the nozzle of the grease nipple
into the lubrication hole and press a few times to obtain a uniform distribution of the
lubricant.

Blade tightness adjustment

The power supply of the trimmers must be disconnected before operation.
Check the tightness of the blade before use. The blade with the correct tightening will
not wobble neither to the left nor to the right. If the tightening of the blade is optimal,
the scissors will save the battery and not unnecessarily strain the engine.
Note: the blade must not swing sideways when closed. Side swinging will produce a gap
between the two blades, resulting in the gear teeth not meshing properly, potentially
causing damage to the mechanical structure.
32
Lubrication