Battery Charging; Charging Steps - Active TIGERCUT 35 Manual Del Usuario

Battery Charging

The battery of the new product is not fully charged. Place the battery on the desktop,
insert the charger output jack into the battery socket, as illustrated in Fig. 1 and then
plug the charger plug into the power socket. When the indicator light lights up, charging
starts.
When the indicator light of the charger is red, it indicates that the charger is charging;
when it is green, the charging is done and the battery can be used.

Charging steps:

1. Place the battery on the desktop and insert the charger plug into the battery, as
shown in Fig. 1;
2. Plug the charger into a power outlet;
3. When the indicator light of the charger is red, it indicates that the charger is charging;
when it is green, the charging is done.
Precautions: Each indicator light represents the charging state of one USB. This
charger has three/two USB ports, as illustrated in Figs. 3-4. Two-port and
three-port chargers are optional based on the model of the product you
purchase.
Charger plug
Battery
29