Control Panel And Display; Switching On And Off - Hilti PS 250 Manual De Instrucciones

can be kept nearby (e.g. at the foot of the scaffold, in a
vehicle, in the site office etc.). When the user intends to
make more scans than the scanner is capable of storing
7.2 Operating the scanner
en

7.2.1 Control panel and display

Control panel
1
2
Display
1

7.2.2 Switching on and off

Press the on / off button to switch the scanner on or off.
The scanner can be switched off only when the main menu is displayed. To reach this screen, press the Cancel button
repeatedly until the main menu is displayed.
7.2.3 Main menu
The system always starts in the main menu. All scanning functions and set-up options are selected here. The battery
charge status is displayed at the top of the screen together with the memory status. The various scan modes and
settings menus are displayed as symbols on the left side of the screen. Use the Arrow buttons to toggle between
these options. Press the Confirm button to confirm the selected option.
12
3
4
5
2
3
in its memory and wishes to avoid repeated journeys to
the monitor, the PSA 55 infrared adapter can be used
or the monitor attached to a belt or carried using the
shoulder strap supplied.
Arrow but- Toggle up or down in options or
@ tons values.
Confirm Confirms a value or a selection.
; button
On/off but- Switches the tool on or off.
= ton
Cancel but- Cancels an input, cancels the
% ton path being scanned or goes
back one step within a menu.
Record Starts or stops a recording.
& button
Menu area. Functions that can be selected
@ using the Arrow and Confirm
buttons
Status in- Information such as battery
; formation charge status and memory
status.
Variable This is where feedback / infor-
= area. mation for the user is displayed,
e.g. scanning mode, bar depth,
scanning progress, etc.