Tabla de contenido
Idiomas disponibles
Idiomas disponibles
3. Product description
3.1. Indicators and operator controls
"Red" LED
Push button
LED
"Red" LED
The "red" LED illuminates during operation
and when an alarm is triggered
push
Push button
The Push button is used to switch SpillGuard®
connect on and off and also to turn off the
signal when an alarm has been triggered.
20/48
Wireless signal
In the event of a leak, the alarm signal is
transmitted as a digital signal by means of
the integrated wireless module. The alarm is
transmitted by radio (narrow band NB-IoT) to
the DENIOS server and from here to the text
message and/or e-mail recipient saved.
3.2. Technical data
Marking
II 1G Ex ia ma IIB T4 Ga
Operational temperature
0 °C to 40 °C
range*
Temperature class
T4 (max. 135°C)
Explosion group
IIB
Intrinsically safe
Ignition protection type
encapsulation
Equipment category
1G
Ø 110 mm, height
Dimensions
40 mm
Weight
215 g
Nominal voltage
3.0 V
Duration of use
Max. 5 years
Required level height for
6 mm
sensor wetting
TÜV 20 ATEX 8602
Certificate
IECEx TUR 20.0076
*Operational temperature range
The recommended operational temperature
range is the basis for the given period of use of
5 years. SpillGuard® connect can also be used
at a temperature of down to maximum -10°C.
A longer load at low or high temperatures or
high humidity can shorten the actual battery
service life. In the case of temperatures
fluctuating around the dew point, false alarms
can occur more often.
3.3. WEB registration using
registration code
Together with the delivery note you will
receive a 12-digit registration code. For initial
registration:
Open your web browser and enter the
1.
following address:
http://connect.denios.com
Enter the 12-digit registration code and
2.
click „Next".
Registration
aKQq-q9kB-fbg3
NEXT
SpillGuard® connect Quick Guide | 276016 | Rev. 1
21/48
Tabla de contenido
