FONESTAR SCD-600 Manual Del Usuario página 9

Requirements:
+ Cameras with PELCO-D protocol and Baudrate setting at 9600bps.
+ Connections: data cable, pins 1 and 2 are the ones that connect directly to the camera.
In software:
1.- In the CAMERA tab, select the PELCO_D protocol from the drop-down menu.
2.- Select the camera position for the selected microphone. Select the microphone name from the
PRESET drop-down (this appears in the lower right corner of the screen of each microphone).
3.- Make the settings for the individual cameras by selecting them with the ADDRESS field.
4.- Adjust the focus, zoom and position and save the setting by pressing SAVE.
NOTE: when the microphone identified in the PRESET is active the configured camera(s) will be placed
in the set position.
5.- Repeat steps 3 and 4 to configure the position of all cameras for the same preset. Once finished
repeat all the steps by changing presets until all the PRESETS for the installed microphones are
configured.
SOFTWARE
For the configuration and use of the conference system via the PC and Android software download the user
guide from the following web address: http://www.fonestar.com/SCD-600
SCD-600
- 9 -
EN