Technical Specifications; Installation Tips - Montarbo M Serie Manual De Uso

M SERIES
QUICK SETUP
5
Place the speakers in correct position.
With the device off, set the main level volume to
minus infinity
Connect the power supply unit and switch the
devices on

INSTALLATION TIPS

6
For optimal positioning, set the speakers in vertical position at ear height (preferably use the
midpoint between woofer and tweeter as a reference). slightly tilted towards the listener.
It is advisable to mechanically decouple the monitors from the desk with proper insulating
foam supports (not included) to avoid undesired resonances. Avoid frontal obstacles that
may cover the reflex openings or the transducers.
12
Perform the necessary connections of the
audio sources (XLR, TRS balanced, RCA
unbalanced)
Adjust the audio level and any equalization
on the back depending on the optimisation
required for listening.
TROUBLESHOOTING
7
The loudspeaker will not turn on
Check that power supply is present upstream of the installation.
Ensure that the power supply cable is properly plugged in.
Resonances are heard, in particular on low frequencies
Follow the installation tips, and use the EQ controls on the rear to correct any unwanted
reflections caused by the monitor position in the listening room.

TECHNICAL SPECIFICATIONS

8
MODEL M6S
Type 2-way bass reflex
MAX SPL (@ 1m) 111 dB
Frequency response (-10 dB) 40 Hz-22 kHz
HF 1" silk dome tweeter
LF 6.5" woofer custom, reinforced Kevlar
cone
X-OVER
1780 kHz
Amplification class A/B
Peak power (LF+HF)
30 W + 10 W
Operating voltage 110-120V~ 50-60Hz
220-240V~ 50-60Hz
Signal process Analogue, active crossover filter
I/O connectors
1 x BALANCED TRS/XLR
1 x UNBALANCED RCA
Controls
MAIN level
EQ: HPF + HF LEVEL
Fuse
110-120V~: T2A L 250V~
220-240V~: T1A L 250V~
Power consumption at 1/8th 0.36 A (110-120V~)
of the power (average 0.19 A (220-240V~)
conditions of use)
Absorption at 1/3rd of power 0.5 A (110-120V~)
(maximum conditions 0.3 A (220-240V~)
of use)
Standby consumption 11 W
Cabinet material
MDF, front in ABS
Dimensions (L x H x D) 250 x 430 x 237 mm
(9.8" x 16.9" x 9.3")
Weight 7.9 kg (17.41 lbs)
User manual
M8S
2-way bass reflex
115 dB
35 Hz-22 kHz
1" silk dome tweeter
8" woofer custom, reinforced Kevlar
cone
1950 kHz
A/B
50 W + 10 W
110-120V~ 50-60Hz
220-240V~ 50-60Hz
Analogue, active crossover filter
1 x BALANCED TRS/XLR
1 x UNBALANCED RCA
MAIN level
EQ: HPF + HF LEVEL
110-120V~: T3.15 A L 250V~
220-240V~: T1.6A L 250V~
0.65 A (110-120V~)
0.34 A (220-240V~)
1 A (110-120V~)
0.52 A (220-240V~)
12 W
MDF, front in ABS
310 x 524.5 x 280 mm
(12.2" x 20.6" x 11")
10.7 kg (23.6 lbs)
13