Tabla De Contenido - Sony SVT-RS100 Manual De Instrucciones

Overview/Table of Contents
Overview
The SVT-RS100 is a computer interface board
designed for the SVT-RA40, SVT-RA168, SVT-N72P
and SVT-RA96P Time Lapse Videocassette
Recorders. This manual describes how to install the
board in the VCR and gives the interface specifications
and command references.
By installing the SVT-RS100 Computer Interface
Board, you can control the SVT-RA40, SVT-RA168,
SVT-N72P or SVT-RA96P Time Lapse Videocassette
Recorder from a personal computer or a controller via
an RS-232C or RS-485 interface .
For details on connections required after you have
installed the SVT-RS100 in the SVT-RA40, SVT-
RA168, SVT-N72P or SVT-RA96P and details on how
to operate the VCR with the SVT-RS100, refer to the
instruction manual of the SVT-RA40, SVT-RA168,
SVT-N72P or SVT-RA96P.
Table of Contents
Getting Started ........................................................... 4
Unpacking ............................................................ 4
Preparation............................................................ 4
Installing in the VCR ............................................ 4
Connecting to a Computer .................................... 5
RS-232C/RS-485 Interface ........................................ 6
Pin assignment ...................................................... 6
RS-485 TERMINATE switch .............................. 6
Setting the transmission mode for an RS-232
Interface ........................................................... 6
Setting the transmission mode for an RS-485
Interface ........................................................... 7
Command Reference ................................................. 8
Data format ........................................................... 8
VCR Control Commands ..................................... 8
VCR Setup Commands ...................................... 10
Menu Setup Commands ..................................... 10
VCR Status Commands ...................................... 11
Other Commands ................................................ 11
Return Commands .............................................. 11
T/L STATUS SENSE (D6H) bit allocation ....... 12
STATUS SENSE (D7H) bit allocation .............. 12
RS-232C Commands .......................................... 13
RS-485 Commands............................................. 13
RS-485 Return Commands ................................. 14
Table of Commands ................................................ 15
3