Your Internet Cable Is Not Plugged In - Linksys EA2750 Guia Del Usuario

Your Internet cable is not plugged in

If you get a ''Your Internet cable is not plugged in'' message when trying to set up your router, follow
these troubleshooting steps.
Make sure that an Ethernet or Internet cable (or a cable like the one supplied with your router)
•
is securely connected to the yellow Internet port on the back of the router and to the
appropriate port on your modem. This port on the modem is usually labeled Ethernet, but may
be named Internet or WAN.
Make sure that your modem is connected to power and is turned on. If it has a power switch,
•
make sure that it is set to the ON or l (as opposed to O) position.
If your Internet service is cable, verify that the cable modem's CABLE port is connected to the
•
coaxial cable provided by your ISP.
If your Internet service is DSL, make sure that the DSL phone line is connected to the
•
modem's DSL port.
If your computer was previously connected to your modem with a USB cable, disconnect the
•
USB cable. Install the router again.
message
65