How To Manually Set Up Your Internet Connection - Linksys EA2750 Guia Del Usuario

After you finish changing settings, click Save and close the browser window.
Tip—For descriptions of the settings, click Help at the top of the screen.

How to manually set up your Internet connection

Running setup configures your router's Internet connection. However, for some ISPs (Internet Service
Providers), especially those outside of the United States, you may need to manually configure your
router's Internet connection.
How to configure basic Internet connection settings
Connect to your router and log in using the instructions under ''How to manually set up your router'' on
this page.
Under Router Settings, click
the Internet Settings tab.
IPv6 Internet connection settings
IPv6 is a new IP protocol that uses simplified packet headers and requires IPSec. It also has improved
support for mobile IP and computing devices.
Note—To use your router's IPv6 Internet connection settings, IPv6 service from your ISP (Internet
service provider) is required. For more information on this service, ask your ISP.
To manually configure your router's IPv6 settings:
1. Use an Ethernet cable to connect your router to your computer.
2. Log in to Linksys Smart Wi-Fi. (See ''How to connect to Linksys Smart Wi-Fi'' on page 10.)
3. Under Router Settings
Internet Settings
4. Click the
Connectivity . The Connectivity page will open to the Basic tab. Choose
, click Connectivity . The
IPv6
tab, and click
Connectivity page opens.
.
34