Charge The Collar Receiver - SportDOG X Serie Manual De Funcionamiento

STEP :: 2 CHARGE THE COLLAR RECEIVER
425X-E or 825X-E
1.
Lift the rubber cover protecting the
collar Charging Jack and connect the
charger.
2. Plug the charger into a standard wall outlet for 2 hours every time you charge. The Receiver Indicator
Light will flash green once per second once the battery is completely charged.
3.
Remove the charger and secure the
rubber cover fully to ensure debris
does not enter the Charging Jack.
Using Li-Ion technology, the Collar Receiver only requires a 2-hour charge. It is not harmful to let the unit
charge for more than 2 hours.
TO TURN THE COLLAR RECEIVER ON
Press and release the On/Off Button. The Collar Receiver Indicator
Light will come on and the Collar Receiver will beep 1-2 times for
the SD-425X-E / SD-825X-E and 1-3 times for the SD-1225X-E /
SD-1825X-E, depending on what stimulation range is chosen. The
default is 2 (medium).
TO TURN THE COLLAR RECEIVER OFF
Press and release the On/Off Button. The Receiver Indicator Light comes
on solid red and the Collar Receiver beeps for 2 seconds. To extend the
life between charging cycles, turn the Collar Receiver off when it is not in use.
NOTE: Approximate battery life between charges is 50 to 70 hours for SD-425X-E / SD-825X-E and 140 to 160
hours for SD-1225X-E / SD-1825X-E, depending on frequency of use
6
1225X-E or 1825X-E
Align the Contact Points with the Charging Cradle,
making sure the hole on the Cradle aligns with the
Receiver Indicator Light, and push the Cradle up and
back until it snaps in to place. Connect the charger to
the Charging Cradle.
Remove both the charge connector and Charging Cradle
from the Collar Receiver. The Charging Cradle is not
intended to be attached when the Collar Receiver is in use.
.
WWW.SPORTDOG.COM
ON/OFF
BUTTON