Changing The Temperature Setting; Setting The Timer; Delayed Ignition; Delayed Shutdown - Vitrifrigo STR6000 Manual De Uso

5.3

Changing the temperature setting

To change the setpoint temperature, press the
The new setpoint remains on the display.
the setpoint can be changed within a predetermined range: from a minimum of 17 to 30°C
The lower the temperature set, the higher the unit's consumption will be.
NOTE
If the desired temperature is not reached in ECO mode or with a low fan speed, raise the fan speed or switch
to AUTO mode.
5.4

Setting the timer

The Stratos air conditioner is equipped with a timer for timed switch on/off. At the end of the time set in the
timer, the air conditioner switches on/off.
If the timer is activated, the display shows the remaining time.
Each time the key is pressed, the timer increases by 30 minutes. A long press excludes the timer.

6.5.1 Delayed ignition

With the air conditioner on, press the Timer key until the desired time is reached.
Press the on/off key to switch off the air conditioner. The time remaining until switch on will be visible on the
screen.
The air conditioner will turn on at the end of the count, with the settings active at the time of the last shutdown.

6.5.2 Delayed shutdown

With the air conditioner on, press the Timer key until the desired time is reached.
The time remaining until switching off will be visible on the screen.
The air conditioner will turn off when the count is complete.
5.5

Switching off the air conditioner

The air conditioner is turned off by pressing the ON/OFF key for more than 2 s.
The air conditioner stores the latest settings.
and buttons to the desired temperature.
33
EN