Control Panel - Vitrifrigo STR6000 Manual De Uso

5.1

Control panel

The panel is equipped with a 6-key keyboard and an LED display.
Long press to turn the air conditioner on/off
A Switch
When pressed together with the D key, it enters/exits the user parameter programming
+
Press + to increase the setpoint temperature
B
-
Press - to decrease the setpoint temperature
C
D Fans Press to change the fan speed from 1 to 6 and then AUTO
E Mode Press to change the operating mode (AUTO, ECO, NIGHT)
Press to activate timed switch on/off; each pressing of the key increases the duration
F Timer
by 30 minutes
1 SetPoint
It shows the determined setpoint
2 Debug It shows the active mode
3 Timer It shows the programmed switch on/off delay
It shows the fan speed (if AUTO it means that the speed is regulated automatically,
4 Fans
based on the setpoint and environmental conditions)
5 IR
Infra-red remote control sensor
Area intended for signalling messages and alarms
30