Festo LOGO! 8 TP EduTrainer Descripción página 33

14. Start program execution in the LOGO!. Enter the required settings to this end directly via the LOGO!
control unit:
– Select the starting point in the main menu with the  or  key.
– Acknowledge with OK.
– Select Yes:  or  key.
– Acknowledge with OK.
Note
You can change the operating mode at the LOGO! via the PC as well. Click the "Change LOGO!
operating mode" command under "Transmit" in the "Extras" menu.
15. Now examine the sequence for the electro-pneumatic process.
Have fun creating and testing your own logic programs with the LOGO! EduTrainer
Note
Control programs can also be entered directly via the LOGO! control unit. In this case you need
neither LOGO!Soft programming software nor an Ethernet cable for connecting a PC to the LOGO!
®
EduTrainer TP.
Further information can be found in the LOGO! manual which is part of the online help included with
LOGO!Soft Comfort, or on Siemens' website at http://www.siemens.de/logo. Comprehensive
documentation such as the LOGO! handbook is available free of charge as a PDF file.
© Festo Didactic 8049519
®
TP.
33