Samsung VS20A95 Serie Manual Del Usuario página 25

• Before unplugging or plugging in the Clean
Station, turn off the vacuum and make sure
that the pins of the power plug do not come
into contact with your hands.
– Fire or electric shock may occur.
• Do not step heavily on the upper part of the
Wet Brush while using it.
– Product damage or floor damage may
occur.
• When assembling the vacuum, be careful not
to catch your fingers in the joints.
• Do not use the vacuum cleaner on objects
that can be easily scratched (TV, monitors,
etc.).
• When cleaning, be careful that the side of
the brush does not bump into a molding
part, a wall, furniture, etc. and cause
staining.
– For a slight stain, remove it with a wet
tissue or a cleaner.
• Do not use water to clean the product when
in use.
• You should use the product in dry places
and do not use the product in wet places or
on water.
• Do not use the product in direct sunlight
or high heat and do not store the product
inside a car.
• Do not put hot water, detergent, etc. into the
Water Tank of the Wet Brush.
– Product malfunction or performance
degradation may occur.
• When not using the Wet Brush, empty all
the water in the Water Tank.
Maintenance
NOTE
• Sometimes the wheel of a brush can scratch
the floor. Before using the vacuum cleaner,
check the status of the wheels of the brush.
– If there is foreign matter on the wheel of
the brush which cannot be removed easily,
contact a Samsung service center.
• If the inner part of the Wet Brush is clogged
with large foreign matter, spinning speed
decreases or the spin disk stops.
CAUTION
• Do not push the vacuum cleaner while it is
stored in the Clean Station.
– Personal injury, product and floor damage
may occur.
• Storing the product in sunlight for long
hours may cause parts of the product to
deform or discolor. Therefore, store the
product in the shade.
• Do not clean the brush of the vacuum
cleaner with water. Cleaning it with
water can cause deformation of parts or
malfunction.
• If you notice a continuous reduction in
suction or the vacuum cleaner overheats
abnormally, clean the products and replace
filters.
• When the Clean Station smells bad, replace
the dust bag or clean the filters.
English 25