EN-64
6.4 Editable
Editable
If the
SDCARD, USB. The default is SDCARD. The terminal will restart when menu is changed. The 'Link
to' contains RS232, 2
The output printed to the interface above will be saved as a .txt file distinguished by month into
SDCARD or USB flash device depending on the selection of the 'Save to' menu. For example,
201612.txt is the data printed to the interface during Dec. 2016.
A SD memory card is necessary to use Editable memory, or an error message will display (SD card
is not installed). Customer can only use either Alibi or Editable format to store the weighing result.
The file name and directory are listed below:
SDCARD
USB flash
device
When the 'Save to' menu is set to USB, less than or equal to 32G flash device is recommended.
In addition, barcode scanner is also supported. Since there are many brands of barcode scanners in
the market, OHAUS tested and confirmed that below Barcode scanners from Datalogic is
compatible:
QuickScan series
Find Quality Products Online at:
is set On, the submenu Save to and Link to will display. The 'Save to' contains
nd
RS232, RS485, Ethernet, Wi-Fi and USB device. The default is RS232.
File Name
Directory
Data
201612.txt
\D5000\DATA\
/
Data
201612.txt
GlobalTestSupply
www.
Defender 5000 Indicators
.com