Filter Level; Auto Zero Tracking; Auto Dim; Screensaver - OHAUS TD52XW Manual De Instrucciones

Defender 5000 Indicators

3.5.3 Filter Level

Set the amount of signal filtering.
Low
Medium
High

3.5.4 Auto Zero Tracking

Set the automatic zero tracking functionality.
OFF
0.5division
1d
3d

3.5.5 Auto Dim

Set the display backlight functionality.
Settings:
1 min = backlight turns off after 1 minute of no activity.
2 min = backlight turns off after 2 minute of no activity.
5 min = backlight turns off after 5 minute of no activity.
10 min = backlight turns off after 10 minute of no activity.
Always on
Off

3.5.6 ScreenSaver

Set whether the screensaver is enabled after the selected time period.
Off = Disabled.
5 min = the screensaver is enabled after 5 minutes.
10 min = the screensaver is enabled after 10 minutes.
30 min = the screensaver is enabled after 30 minutes.

3.5.7 Auto Off

Set whether the display enters sleep mode after the selected time period.
Off = Disabled.
5 min = the display enters sleep mode after 5 minutes.
10 min = the display enters sleep mode after 10 minutes.
30 min = the display enters sleep mode after 30 minutes.

3.5.8 Adjust Contrast

Set the contrast degree of the display.
1
2
3
4
5

3.5.9 Reset

Reset all settings to factory default settings.
Yes = Reset.
No = Do not reset.
NOTE: If the Security Switch is set to ON, Stability, Zero Range, Filter Level and Auto Zero Track
settings are not reset.
Find Quality Products Online at:
= faster stabilization time with less stability.
= normal stabilization time with normal stability.
= slower stabilization time with more stability.
= disabled.
= the display will maintain zero until a change of 0.5 division per second has
been exceeded.
= the display will maintain zero until a change of 1 division per second has
been exceeded.
= the display will maintain zero until a change of 3 divisions per second has
been exceeded.
GlobalTestSupply
www. .com
[email protected]
EN-25