Velleman DVM8861 Manual Del Usuario página 5

6. Use
 Configure the thermometer by pulling the measurement trigger (6) once. The
display lights up.
 Use the mode button (5) to scroll through the setup of the device. Use up (3) or
down (4) button to adjust the value and press the mode button (5) again to save
the value and go to the next item. To cancel setup, pull the measurement trigger
(6). Pushing the mode button (5) after setting the lower alarm limit will start the
set-up cycle again.
Push # Function
1 Emissivity adjustment
2 Lock mode
3 Enable alarm upper limit
V. 04 – 08/07/2014
DVM8861
1. IR sensor + laser beam
2. LCD Display
3. up button
4. down button
5. mode button
6. measurement trigger
7. battery cover
8. handle grip
A. data hold
B. laser 'on'
C. lock
D. high/low alarm
E. °C/°F indication
F. battery indication
G. emissivity value
H. max. temperature value
I. current temperature
Range
0.10~1.00
on / off
on / off
5 ©Velleman nv