Battery Operation - Olympia NC 345 Manual De Instrucciones

REP/PRINT
1. You can connect a printer at the USB port. A special cable (not contained
in the package contents) is available from GO Europe.
2. Press this button for 2 seconds to activate the printer function.
► All the details regarding quantities, denominations and total values of
the bank notes detected are printed out.
A few seconds after having pressed the REP/PRINT button for the last time,
the device switches back to normal operating mode.

Battery Operation

The device can also be powered for up to 4 hours without the need for an
external power supply by means of a rechargeable battery (not contained in
the package contents). Only use the battery specified and distributed by GO
Europe.
When powered by the battery, the device automatically switches off after 10
minutes in Standby mode.
The battery icon continues to indicate that the battery is fully charged. If the
icon flashes slowly, it indicates the battery is being charged. If it flashes
quickly, it indicates the battery charge is low and must be recharged.
Inserting / Changing the Battery
1. Open the battery compartment cover on the underside of the device.
2. Connect the plug on the battery to the socket in the battery compartment.
3. Insert the battery in the battery compartment.
4. Close the battery compartment cover.
5. Connect the power adapter to a properly installed power socket.
► An icon in the display indicates the current charge status of the bat-
tery (NC 365 only).
6. Disconnect the power plug from the power socket.
7. When the charging process has been completed, disconnect the external
power adapter from the power supply socket on the bank note validator.
► The bank note validator can now be used as a portable device.
8. Charge and discharge the device every 15 days, otherwise the service
life of the battery will be impaired.
G
Battery Operation
21