Olympia NC 345 Manual De Instrucciones página 19

Preparing Bank Notes
Pay attention to the following points to prevent malfunctions:
1. Check the batch of bank notes for paper clippings, paper clips, rubber
bands and other foreign bodies and remove them before inserting the
bank notes in the machine.
2. Do not insert any damaged bank notes.
3. Smooth out any creased and folded bank notes before inserting them.
Inserting Bank Notes
Lay the bank notes individually in the tray on the input/output side with the
short side at the front. The bank note is drawn in and controlled automati-
cally.
In the case of a bank note which is wrongly inserted, suspicious or not
recognised, an error is indicated in the display and an acoustic signal is
issued. The bank note is rejected and returned to you.
Pay attention to the output direction selected.
1. Wait until the bank note controlled has been fully ejected from the device
and remove it before inserting the next bank note to be controlled.
The best results are achieved after a warm-up phase of 3 minutes. Bright ambi-
ent light can affect the sensor and falsify results.
Selecting the Output Side
Depending on the output side you select, the bank notes are ejected at the front
or rear side of the device, accordingly.
Counterfeit or unrecognised bank notes are always ejected at the front
output side.
NC 345
1. Press the arrow buttons (qp) to select the bank note output direction
(forwards or backwards).
► A green arrow at the bottom of the display indicates the output direc-
tion.
G
Operation
19