After Use - Nevadent SMD 24 A1 Instrucciones De Uso E Indicaciones De Seguridad

♦ Start at the front side of your upper molars and move the nozzle attachment
the edges of the teeth from one side to the other. Repeat this process for the back of the
upper teeth and for the back and front of the lower teeth.

After use

NOTE
► Empty the water tank
1. Switch the On/Off switch for the water jet I/0
removing the nozzle attachment
2. Set the rotary switch
3. Remove the water tank
e
tank . Pour the remaining water out of the water tank
4. Close the lid
w
unit .
5. Set the rotary switch
washbasin.
6. Switch the On/Off switch for the water jet I/0
any remaining water from the line and rinse out the nozzle attachment
7. Switch the On/Off switch for the water jet I/0 jet
8. Set the rotary switch
9. Press the release button
out of the hand unit
10. Rinse the nozzle attachment
11. Dry the nozzle attachment
z
ment .
12. Place the hand unit
│ GB │ IE
■ 12
e
after every use to prevent the growth of germs and bacteria.
2
r
on the main unit
e
from the main unit
t e
of the water tank
r
on the main unit
r
on the main unit
0
on the hand unit
4
.
2
under running water.
2
and place it in one of the spots in the storage compart-
4
in the cradle
3
on the hand unit
from your mouth.
w
to 0.
w
and open the lid
e
and place the water tank
w
to 5 and hold the hand unit
3
on the hand unit
3
on the hand unit
w
to 0.
4
and then pull the nozzle attachment
5 w
on the main unit
2
along
4
to 0 before
t
of the water
into the washbasin.
e
back in the main
4
over the
4
to I to clear
2
.
4
to 0.
.
SMD 24 A1
2