Festo Robotino 8049096 Descripción página 23

Mechanical safety
• ®
Carry Robotino by the handles in order to transport it.
•
Mount all components securely to the chassis or the mounting fixtures intended for this purpose.
•
Only reach into the robot system when it is at a complete standstill.
•
Never touch the wheels on Robotino
turning. In order to increase resistance at the wheel, press Robotino
conducting exercises dealing with the subject of the PID controller). Observe the warning symbols on
the wheels which make reference to this risk of injury.
•
Robotino ® consists of a precision laser-cut and laser-welded stainless steel construction. When working
with Robotino ® , beware of any sharp edges (cable through-feed, mechanical assembly/disassembly).
•
If any of the wheel covers are removed, make sure that hair or clothing does not get caught in the
wheels.
•
Secure the load when removing the mounting tower.
© Festo Didactic 8049097
® ! Depending on the program, the wheels could suddenly start
®
into the floor (e.g. while
23