Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Intended Use
WARNING:
head is attached this is not an edger, and is not
intended for edging.
This string trimmer is designed for household
trimming applications.
DO nOT use under wet conditions or in presence of
flammable liquids or gases.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
ASSEMBLY AND ADJUSTMENTS
WARNING:
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can cause injury.
Powerhead
WARNING:
•
Before any use, be sure everyone using this unit
reads and understands all manufacturer's safety
instructions and other information contained in
manufacturer's manual.
•
Never apply power without an attachment being
properly mounted to the powerhead.
WARNING:
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can cause injury.
Your string trimmer is designed such that the power head
can separate from the trimmer attachment by releasing
clamp
14
and gently pulling them apart by their shafts.
This should only be done with the power switch off and the
battery pack removed. Inside the shaft of the power head
is a mechanical coupling that will spin if the power head is
turned on. This coupling can cause severe injury if contacted
while the power head is operating .
The coupling is a universal type compatible with the
coupling used on many electric and gasoline powered
"split boom" products. Use only attachments recommended
by CRAFTSMAN. Other attachments may fit this product.
Use of attachments other than those recommended by
CRAFTSMAN may increase the risk of injury.
CAUTION:
blower/thrower attachment be used.
When the string trimmer
To reduce the risk of
To reduce risk of injury:
To reduce the risk of
in no case should a snow
Assembling the Pole (Fig. A, B, E)
1. When installing the lower trimmer attachment
the upper trimmer pole
with the main hole
34
2. Lock the clamp
14
.
3. When properly assembled, the trimmer should look like
Fig. A. If it does not, do not use, disassemble and re-align
the lower trimmer attachment
15
engages the correct hole
4. Do not assemble so that the lower trimmer
attachment
6
head is upside down or sideways when
the trimmer is held according to Fig. E.
Fig. B
7
Attaching the Auxiliary Handle (Fig. A, C)
1. Place the auxiliary handle
22
so the upper trimmer pole
2. Hold the auxiliary handle in place and slide the handle
bolts
23
into the handle from the top, threading them
into the handle base.
3. Tighten the handle bolts with the supplied hex wrench .
Ensure the handle is securely attached.
4. Repeat for the other side of the auxiliary handle.
4
Fig. C 23
23
OPERATION
WARNING:
serious personal injury, turn unit off and
remove the battery pack before making any
adjustments or removing/installing attachments
or accessories, when replacing line, or prior to
cleaning. An accidental start-up can cause injury.
English
6
into
7
, align the latching button
as shown in Fig. B.
6
so the latching button
34
.
14
6
34
15
4
on top of the handle base
6
is between them.
22
23
23
To reduce the risk of
F
15
7
Tabla de contenido
