Configuring The Option Menu - Brandt B4302UHD LED Manual De Instrucciones

Menu Operation
Add: You can also add a WiFi network manually by selecting Add others.
Press / buttons to select Add, then press
messages below the menu to input the network name, encryption mode and network
password, and then press
search wireless routing and connect. When the network is connected, the current
wireless network will be added into the list of wireless networks.
WOW: Switch the WOW on or off.
If Your TV Fails to Connect to the Internet
• Your TV may not be able to connect to the Internet because your ISP has
permanently registered the MAC address (a unique identifying number) of your PC
or modem, which it then authenticates each time you connect to the Internet as a
way of preventing unauthorized access. As your TV has a different MAC address,
your ISP can not authenticate its MAC address, and your TV can not connect.
• To resolve this problem, ask your ISP about the procedures required to connect
devices other than a PC (such as your TV) to the Internet.
• If your Internet service provider requires an ID or password to connect to the
Internet, your TV may not be able to connect to the Internet.
• The internet connection may fail because of a firewall problem. If this is the case,
contact your Internet service provider.

Configuring the Option Menu

Language: Select your preferred On Screen Display language.
PVR File System (In DTV mode):
PVR Function Operation Instruction
Preparing
Plug USB flash drive or USB hard disk into USB slot on the TV set.
NOTE:
• USB disk should have capacity at least 512MB.
• USB device must support USB 2.0 high-speed specification.
• Use only USB storage devices formatted with FAT32.
OK
/ buttons to select "Connect", the system starts to
I_
29
button, follow the displayed